Buy Trainz Railroad Simulator 2019 Trainz 2019 DLC: C&O 2-6-6-6 H8 - New River Mining Coal Run PC key
Offers
Screenshots
1 / 16


Trainz series

About Trainz Railroad Simulator 2019 Trainz 2019 DLC: C&O 2-6-6-6 H8 - New River Mining Coal Run
The C&O 2-6-6-6 H8 - New River Mining Coal Run is a Trainz Railroad Simulator 2019 session in which you haul coal in a C&O 2-6-6-6 H8 Allegheny. Take the freight from New River Mining to Hinton on a long run.
The Allegheny
The C&O ordered ten H-8 locomotives from Lima Locomotive Company, delivered in December 1941 and numbered 1600 through 1609. The six-coupled, single-expansion articulated design had 67-inch drivers, a large boiler and a 9-by-15-foot firebox behind the drivers, supported by a six-wheel trailing truck. Four cylinders, each 22.5 inches in diameter with a 33-inch stroke, and a boiler pressure of 260 psi gave the locomotive 110,200 pounds of tractive effort. Its weight was 778,000 pounds.
The locomotives were named Allegheny after the mountain range where they worked. Their tenders held 25,000 gallons of water and 25 tons of coal. To keep the locomotive and tender short enough for existing turntables, the tender’s rear section was raised; a six-wheel leading truck and an eight-wheel trailing truck supported its weight.
Coal runs and service
The C&O used an Allegheny at the head of a loaded coal train and another as a pusher to move as many as 140 cars up the mountain from Hinton. At the summit, the pusher was detached, turned around and sent back to Hinton. The leading locomotive continued down to Clifton Forge, where it was turned for the return trip with empty coal cars.
The route between Hinton, West Virginia, and Clifton Forge, Virginia, covered 80 miles. It included a 13-mile, 0.577% climb to a 2,072-foot summit, followed by a descent on a 1.14% grade. The C&O had 23 Alleghenies fitted with steam heat and signal lines for passenger service, though they were used sparingly for heavy mail and troop trains during World War II.
Design and retirement
The H-8 design followed improvements to the C&O railroad in the 1930s, including new and enlarged tunnels. The railroad’s aging 2-6-6-2s and its 2-8-8-2s, delivered in the 1920s and limited by tight tunnel clearances, could not meet the demands of the coal route. The C&O was considering ordering more 2-10-4s when Lima proposed the more powerful design.
The Allegheny boilers could produce up to 8,000 horsepower, more than any other reciprocating steam locomotive. They were designed to haul 5,000 tons at 45 mph, but in coal service they often hauled trains of 10,000 tons or more at 15 mph, below their potential as high-speed locomotives. The C&O Alleghenies began leaving service in 1952, and the last fire was dropped in 1956.
Frequently asked questions
The best price for Trainz Railroad Simulator 2019 Trainz 2019 DLC: C&O 2-6-6-6 H8 - New River Mining Coal Run is $19.99 at Steam. It is the only shop with an offer that activates in your country.
No. Trainz Railroad Simulator 2019 Trainz 2019 DLC: C&O 2-6-6-6 H8 - New River Mining Coal Run is DLC and only works with Trainz Railroad Simulator 2019.
The minimum requirements for Trainz Railroad Simulator 2019 are: Windows 7, GeForce GT 430, Intel Core i5, 4 GB RAM, 50 GB storage. It also runs on macOS. The recommended specs are in the System requirements section.
Yes. Trainz Railroad Simulator 2019 has multiplayer and a single-player mode.
Mostly, yes. Valve rates Trainz Railroad Simulator 2019 as Playable on the Steam Deck: it runs, but may need some manual setup.
Steam lets publishers create keys to sell in other shops. Once you activate a key, the game is yours to keep, just like a store purchase.
Disclaimer: CD keys have an inherent 1–2% average failure rate. Check the shop terms for buyer protection info. Steam offers no buyer protection for keys bought in other shops and doesn't refund them.















