Buy Train Simulator Classic Train Simulator: SP&S E-1 Class 'Northern' Loco Add-On PC key
Offers
Screenshots

About Train Simulator Classic Train Simulator: SP&S E-1 Class 'Northern' Loco Add-On
The Train Simulator Classic Train Simulator: SP&S E-1 Class 'Northern' Loco Add-On adds the Spokane, Portland and Seattle Railway (SP&S) E-1 Class ‘Northerns’ to Train Simulator. You can drive the locomotives in SP&S livery, with running numbers 700 and 701, on any Quick Drive-enabled route.
The E-1 Class
After years of using second-hand locomotives, the SP&S received permission from its parent companies, the Great Northern Railway and Northern Pacific Railway, to buy new engines. In 1938, it took delivery of three Baldwin Locomotive Works 4-8-4 locomotives, numbered 700, 701 and 702. Designated E-1 Class ‘Northerns’, they shared their design with the Northern Pacific A-3 but burned oil rather than coal.
The locomotives produced a tractive effort of 69,800 lbf (310.49 kN) and used Walschaerts valve gear, piston valves and two cylinders. They first hauled the SP&S’s premier passenger services, including the Empire Builder. The arrival of diesel locomotives moved them to secondary passenger duties by the late 1940s, and they were assigned to freight services by the mid-1950s.
All three ‘Northerns’ had retired by summer 1956. No. 700 pulled its last passenger train from Portland, Oregon, to Wishram, Washington, on 20 May 1956. It is the only one of the three to have been preserved and can be viewed at the Oregon Rail Heritage Center.
Locomotive features
- E-1 Class ‘Northerns’ in Spokane, Portland and Seattle Railway livery
- Two running numbers: No. 700 and No. 701
- Quick Drive compatibility
- Cab lighting
- Opening cab windows
Scenarios
Scenarios for the add-on are available through the Steam Workshop, both online and in-game.
Frequently asked questions
The best price for Train Simulator Classic Train Simulator: SP&S E-1 Class 'Northern' Loco Add-On is $19.99 at Steam. It is the only shop with an offer that activates in your country.
No. Train Simulator Classic Train Simulator: SP&S E-1 Class 'Northern' Loco Add-On is DLC and only works with Train Simulator Classic.
The minimum requirements for Train Simulator Classic are: Windows 10, GeForce GTX 750 Ti, Intel Core i3-4330, 4 GB RAM, 40 GB storage. It runs on Windows only. The recommended specs are in the System requirements section.
No. Train Simulator Classic is a single-player game.
Mostly, yes. Valve rates Train Simulator Classic as Playable on the Steam Deck: it runs, but may need some manual setup.
Steam lets publishers create keys to sell in other shops. Once you activate a key, the game is yours to keep, just like a store purchase.
Disclaimer: CD keys have an inherent 1–2% average failure rate. Check the shop terms for buyer protection info. Steam offers no buyer protection for keys bought in other shops and doesn't refund them.












