Buy Train Simulator Classic Train Simulator: LNWR G2 Super D Steam Loco Add-On PC key
Offers
Screenshots

About Train Simulator Classic Train Simulator: LNWR G2 Super D Steam Loco Add-On
Train Simulator Classic Train Simulator: LNWR G2 Super D Steam Loco Add-On adds the LNWR G2 Class steam locomotive to Train Simulator, along with freight rolling stock and two bonus locomotives. The G2 was designed in the 1920s as a more capable 0-8-0 than the earlier G1, itself essentially a superheated D Class. Its upgrades included higher boiler pressure, strengthened frames, larger axles and axle boxes, and redesigned, strengthened direct-acting joy valve gear. All 60 G2s were new builds.
The G2 in service
The LNWR’s 0-8-0 fleet grew from a lineage dating to the 1890s. Although the G2 fleet was of average size, the LMS had 502 active 0-8-0s in total, making it the fourth-largest fleet on the LMS and the sixth-largest on British Railways. G2s worked across the network in freight, passenger, banking and shunting duties.
After the LNWR merged into the LMS, the G2s remained in service alongside newer designs, including locomotives by Sir William Stanier. Stanier-supervised upgrades meant that no two G2s were quite the same. The G2s served from 1921 until 1964, outlasting their intended successors, the LMS 7F, also known as the G3 or “Austin 7.” The 7F had long-travel Walschaerts valve gear and higher boiler pressure, but was prone to failures and was withdrawn by 1959. Of the 60 G2s, only one survives in preservation: 49395, now in Shildon as part of the National Railway Museum’s collection.
Locomotives and operation
The G2 is available in clean and weathered LNWR, LMS and BR liveries. The add-on also includes an LNER J94 and an LNER J50, both in weathered BR Black livery. The locomotives feature accurate regulator and reverser operation, a freely moving regulator that can sometimes shut itself, and braking that can lock the wheels and is less effective at higher speeds. Other simulation features include brake fade, a water-level gauge glass, boiler carry-over from overfilling, finite front and rear gravity- and steam-powered sanding, advanced adhesion, and detailed firing and injectors. A custom auto-fireman lets you focus on driving, while dynamic smoke and fire mass are also simulated. A detailed manual covers the G2’s operation.
Scenarios and routes
The add-on is Quick Drive compatible, so you can drive the G2 on any Quick Drive-enabled Train Simulator route. It also includes scenarios for the separately sold Weardale & Teesdale Network route:
- [G2] 03:50 Darlington to Middleton Teesdale: a G2 route scenario.
- [G2] Diversion: a G2 route scenario.
- [G2] G2 on tour: a G2 route scenario.
- [J94] Deliveries: a J94 route scenario.
Frequently asked questions
The best price for Train Simulator Classic Train Simulator: LNWR G2 Super D Steam Loco Add-On is $24.99 at Steam. It is the only shop with an offer that activates in your country.
No. Train Simulator Classic Train Simulator: LNWR G2 Super D Steam Loco Add-On is DLC and only works with Train Simulator Classic.
The minimum requirements for Train Simulator Classic are: Windows 10, GeForce GTX 750 Ti, Intel Core i3-4330, 4 GB RAM, 40 GB storage. It runs on Windows only. The recommended specs are in the System requirements section.
No. Train Simulator Classic is a single-player game.
Mostly, yes. Valve rates Train Simulator Classic as Playable on the Steam Deck: it runs, but may need some manual setup.
Steam lets publishers create keys to sell in other shops. Once you activate a key, the game is yours to keep, just like a store purchase.
Disclaimer: CD keys have an inherent 1–2% average failure rate. Check the shop terms for buyer protection info. Steam offers no buyer protection for keys bought in other shops and doesn't refund them.













