Buy Train Simulator Classic Train Simulator: BR GT3 Turbine Loco Add-On PC key
Offers
Screenshots

About Train Simulator Classic Train Simulator: BR GT3 Turbine Loco Add-On
Train Simulator Classic Train Simulator: BR GT3 Turbine Loco Add-On adds the GT3 Gas Turbine Prototype to Train Simulator, with two liveries, locomotive features, passenger coaches and five scenarios for the Woodhead route.
The GT3
Designed by English Electric engineer JOP Hughes, the GT3 was part of a gas-turbine locomotive development programme begun in the late 1940s. Construction started in the early 1950s at English Electric’s Vulcan Foundry in Newton-le-Willows. To limit design changes and use existing machining tools, it had an unusual 4-6-0 wheel arrangement and a single driving cab at the rear, following the layout of a steam locomotive. Other locomotives then being designed had a cab at each end, so they would not need to be turned at journey’s end.
Its 2,700hp EM27L was a two-stage gas turbine with a mechanical gearbox driving the wheels directly, and was most efficient at high speed. The turbine was so light that the locomotive’s frames were three times thicker than those of similarly sized steam locomotives, adding weight to provide the required traction. The GT3 also had a traditional tender carrying 2,000 gallons of fuel oil and a vertical boiler supplied with 1,765 gallons of water.
After static testing at Rugby, the locomotive ran on the Great Central Main Line and the West Coast Main Line, including the Shap incline. It appeared at the Marylebone Rolling Stock Exhibition in 1961, marking the 50th anniversary of the Institute of Locomotive Engineers. As diesel and electric traction grew in popularity, the GT3 was withdrawn and returned to Vulcan Foundry in 1962; it was scrapped nearby in Salford in February 1966.
Driving the locomotive
The add-on includes the GT3 in its original demonstrator livery and a fictional British Rail blue livery. You can use Quick Drive to drive it on any Quick Drive-enabled Train Simulator route. Worn Mk1 maroon passenger coaches are also included.
The locomotive’s features include:
- Simulated turbine flooding if it is overfilled
- A working window demister for cold days
- An optional manual cold-start sequence
- Battery isolation switches
- Opening cab doors and windows
- Configurable head codes and tail lights
- Exhaust heat haze
- A view inside the tender
Woodhead scenarios
Five scenarios for the Woodhead route are included. The route is required to play them.
- Taking to the Tracks
- The Need for Speed
- Heavy Load
- All Stops
- A Glimpse of the Future?
Frequently asked questions
The best price for Train Simulator Classic Train Simulator: BR GT3 Turbine Loco Add-On is $19.99 at Steam. It is the only shop with an offer that activates in your country.
No. Train Simulator Classic Train Simulator: BR GT3 Turbine Loco Add-On is DLC and only works with Train Simulator Classic.
The minimum requirements for Train Simulator Classic are: Windows 10, GeForce GTX 750 Ti, Intel Core i3-4330, 4 GB RAM, 40 GB storage. It runs on Windows only. The recommended specs are in the System requirements section.
No. Train Simulator Classic is a single-player game.
Mostly, yes. Valve rates Train Simulator Classic as Playable on the Steam Deck: it runs, but may need some manual setup.
Steam lets publishers create keys to sell in other shops. Once you activate a key, the game is yours to keep, just like a store purchase.
Disclaimer: CD keys have an inherent 1–2% average failure rate. Check the shop terms for buyer protection info. Steam offers no buyer protection for keys bought in other shops and doesn't refund them.













