Buy Train Simulator Classic Train Simulator: Amtrak HHP-8 Loco Add-On PC key
Offers
Screenshots

About Train Simulator Classic Train Simulator: Amtrak HHP-8 Loco Add-On
Train Simulator Classic Train Simulator: Amtrak HHP-8 Loco Add-On adds the Amtrak HHP-8 electric locomotive and Amfleet I passenger cars. The 8,000-horsepower, twin-cab locomotive was built for Amtrak and the Maryland Area Regional Commuter (MARC) system by Bombardier Transportation and Alstom. Of 21 locomotives ordered in 1999, 15 were produced for Amtrak and six for MARC.
The HHP-8
Designed to haul conventional passenger cars, the HHP-8 was intended to replace Amtrak’s GE E60s and supplement its ageing EMD AEM-7s. It resembles the Acela in external style. Reliability problems and high maintenance costs led to the fleet being phased out after 10 years and replaced by the ACS-64.
The locomotive draws power through dual pantographs from three types of Northeast Corridor supply: 12.5 kV 25 Hz AC, 12.5 kV 60 Hz AC and 25 kV 60 Hz AC. Its design top speed is 135 mph (217 km/h), while its in-service speed is limited to 125 mph (201 km/h) under FRA Tier 1 standards.
Cab features
The locomotive comes in Amtrak’s blue and silver livery and includes cruise control, an in-cab signalling display with driver vigilance, switchable display screens, cab lights, flashing ditch lights and pantograph selection. It is compatible with Quick Drive, allowing you to drive it on any Quick Drive-enabled route.
Scenarios
Four scenarios are included for the NEC: New York-New Haven route, which is available separately and required to play them:
- Simple Controls Tutorial: HHP-8 Simple Controls
- Expert Controls Tutorial: HHP-8 Expert Controls
- Northeast Regional
- Vermonter Rescue
Frequently asked questions
The best price for Train Simulator Classic Train Simulator: Amtrak HHP-8 Loco Add-On is $8.99 at Steam. It is the only shop with an offer that activates in your country.
No. Train Simulator Classic Train Simulator: Amtrak HHP-8 Loco Add-On is DLC and only works with Train Simulator Classic.
The minimum requirements for Train Simulator Classic are: Windows 10, GeForce GTX 750 Ti, Intel Core i3-4330, 4 GB RAM, 40 GB storage. It runs on Windows only. The recommended specs are in the System requirements section.
No. Train Simulator Classic is a single-player game.
Mostly, yes. Valve rates Train Simulator Classic as Playable on the Steam Deck: it runs, but may need some manual setup.
Steam lets publishers create keys to sell in other shops. Once you activate a key, the game is yours to keep, just like a store purchase.
Disclaimer: CD keys have an inherent 1–2% average failure rate. Check the shop terms for buyer protection info. Steam offers no buyer protection for keys bought in other shops and doesn't refund them.












